 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| GU (General Use) Type [2-Channel (Form B) Type] PhotoMOS RELAYS 5. Controls load currents up to 0.13 A with an input current of 5 mA 6. High speed switching: operate time typical of 300 s 7. Eliminates the need for a power supply to drive the power MOSFET 8. Extremely low closed-circuit offset voltages to enable control of small analog signals without distortion 9. Surface-mount model available FEATURES 9.78 .385 6.4 .252 3.90.2 .154.008 6.4 .252 3.60.2 .142.008 1. Approx. 1/2 the space compared with the mounting of Two 1 Form B photo MOS units Two 1 Form B units 9.78 .385 2 Form B type mm inch 2. Applicable for 2 Form B use as well as two independent 1 Form B use 3. Low thermal electromotive force (Approx. 1 V) 4. Eliminates the need for a counter electromotive force protection diode in the drive circuits on the input side TYPICAL APPLICATIONS * High-speed inspection machines * Telephone equipment * Computer TYPES Output rating* Type Through hole terminal Load voltage Load current Tube packing style Part No. Surface-mount terminal Tape and reel packing style Picked from the Picked from the 1/2/3-pin side 4/5/6-pin side AQW414AX AQW414AZ Packing quantity Tube 1 tube contains 40 pcs. 1 batch contains 400 pcs. Tape and reel AC/DC type 400 V 100 mA AQW414 AQW414A 1,000 pcs *Indicate the peak AC and DC values. Note: For space reasons, the package type indicator "X" and "Z" are omitted from the seal. RATINGS 1. Absolute maximum ratings (Ambient temperature: 25C 77F) Item LED forward current LED reverse voltage Peak forward current Power dissipation Load voltage Continuous load current Symbol IF VR IFP Pin VL IL Ipeak Pout PT Viso Topr Tstag AQW414(A) 50 mA 3V 1A 75 mW 400 V 0.1 A (0.13 A) 0.3 A 800 mW 850 mW 1,500 V AC -40C to +85C -40F to +185F -40C to +100C -40F to +212F Remarks Input f = 100 Hz, Duty factor = 0.1% Output Peak load current Power dissipation Total power dissipation I/O isolation voltage Operating Temperature limits Storage Peak AC, DC ( ): in case of using only 1 channel 100 ms (1 shot), VL = DC Non-condensing at low temperatures 486 AQW414 2. Electrical characteristics (Ambient temperature: 25C 77F) Item LED operate (OFF) current Input LED reverse (ON) current LED dropout voltage On resistance Output Off state leakage current Operate (OFF) time* Transfer characteristics Reverse (ON) time* I/O capacitance Initial I/O isolation resistance Maximum Maximum Typical Maximum Typical Maximum Typical Maximum Minimum ILeak Toff Ton Ciso Riso Typical Maximum Minimum Typical Typical Maximum Typical Ron Symbol IFoff IFon VF AQW414(A) 0.7 mA 3 mA 0.4 mA 0.64 mA 1.14 V (1.25 V at IF = 50 mA) 1.5 V 26 50 1 A 0.46 ms 1 ms 0.40 ms 1 ms 0.8 pF 1.5 pF 1,000 M Condition IL = 100 mA IL = 100 mA IF = 5 mA IF = 0 mA IL= 100 mA Within 1 s on time IF = 5 mA VL = 400 V IF = 0 mA 5 mA IL = 100 mA IF = 5 mA 0 mA IL = 100 mA f = 1 MHz VB = 0 500 V DC Note: Recommendable LED forward current IF = 5 mA. *Operate/Reverse time Input Output 10% 90% Toff Ton s For Dimensions, see Page 440. s For Schematic and Wiring Diagrams, see Page 445. s For Cautions for Use, see Page 449. REFERENCE DATA 1. Load current vs. ambient temperature characteristics Allowable ambient temperature: -40C to +85C -40F to +185F 2. On resistance vs. ambient temperature characteristics Measured portion: between terminals 5 and 6, 7 and 8; LED current: 0 mA; Continuous load current: 100 mA (DC) 60 3. Operate (OFF) time vs. ambient temperature characteristics LED current: 5 mA; Load voltage: 400 V (DC); Continuous load current: 100 mA (DC) 1.2 Operate (OFF) time, ms 1.0 0.8 0.6 0.4 0.2 0 100 Load current, mA On resistance, 80 60 40 20 0 -40 50 40 30 20 10 0 -20 0 20 40 60 8085 100 Ambient temperature, C -40 -20 0 20 40 60 8085 Ambient temperature, C -40 -20 0 20 40 60 8085 Ambient temperature, C 487 AQW414 4. Reverse (ON) time vs. ambient temperature characteristics LED current: 5 mA; Load voltage: 400 V (DC); Continuous load current: 100 mA (DC) 1.2 Reverse (ON) time, ms 1.0 0.8 0.6 0.4 0.2 0 5. LED operate (OFF) current vs. ambient temperature characteristics Load voltage: 400 V (DC); Continuous load current: 100 mA (DC) LED operate (OFF) current, mA 5 6. LED reverse (ON) current vs. ambient temperature characteristics Load voltage: 400 V (DC); Continuous load current: 100 mA (DC) 5 LED reverse (ON) current, mA 4 4 3 3 2 2 1 1 -40 -20 0 20 40 60 8085 Ambient temperature, C 0 -40 -20 0 20 40 60 8085 0 -40 -20 Ambient temperature, C 0 20 40 60 8085 Ambient temperature, C 7. LED dropout voltage vs. ambient temperature characteristics LED current: 5 to 50 mA 1.5 8. Voltage vs. current characteristics of output at MOS portion Measured portion: between terminals 5 and 6, 7 and 8; Ambient temperature: 25C 77F 120 Current, mA 80 60 40 100 9. Off state leakage current Measured portion: between terminals 5 and 6, 7 and 8; Ambient temperature: 25C 77F LED dropout voltage, V 1.4 50mA 30mA 1.3 20mA 10mA 1.2 5mA 1.1 1.0 0 Off state leakage current, A 10-3 10-6 20 -6 -5 -4 -3 -2 -1 123456 -20 Voltage, V -40 -60 -80 -100 10-9 10-12 0 20 60 40 80 Load voltage, V 100 -40 -20 0 20 40 60 8085 100 Ambient temperature, C -120 10. LED forward current vs. operate (OFF) time characteristics Measured portion: between terminals 5 and 6, 7 and 8; Load voltage: 400 V (DC); Continuous load current: 100 mA (DC); Ambient temperature: 25C 77F 3.0 Operate (OFF) time, ms 11. LED forward current vs. reverse (ON) time characteristics Measured portion: between terminals 5 and 6, 7 and 8; Load voltage: 400 V (DC); Continuous load current: 100 mA (DC); Ambient temperature: 25C 77F 1.2 Reverse (ON) time, ms 12. Applied voltage vs. output capacitance characteristics Measured portion: between terminals 5 and 6, 7 and 8; Frequency: 1 MHz; Ambient temperature: 25C 77F 120 Output capasitance, pF 100 80 60 40 20 0 2.5 2.0 1.5 1.0 0.5 0 1.0 0.8 0.6 0.4 0.2 0 10 20 30 40 50 LED forward current, mA 60 10 20 30 40 50 LED forward current, mA 60 0 10 20 30 40 50 60 Applied voltage, V 488 9/1/2000 All Rights Reserved, (c) Copyright Matsushita Electric Works, Ltd. Go To Online Catalog |
Price & Availability of AQW414
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |